Sinotrack ST-901 config issues
I tried with ACC OFF and SLEEP0000 01 the following command: <SPBSJ*P:BSJGPS*D:030> from "http://www.urion.cn/m/gps500/gps/help/Default.asp". Means normally 30 min pause. There comes an info back:
<BSJ*N:917xxxx011*Q:guentexxxx20.synology.me:5013*CGREG:1*CSQ:21*GPS:(A,30,25)*A:internet.xxxxxxde,blau,blau*C:180*O:180*CS:0*3U:0*3Z:1*H:18
0*2A:1*GP:NO*60:0*5Y:9.0*5T:6,6*9E:00:00*1H:1*3D:104001*SNW:0*UTZ:1*SOS:0,1>
Can't yet decode that Sh%t. Result: Every 10 minutes comes a bunch of about 20 entries. h02 < 17x.2.x.237... and h02 > 17x.2.x.237... and id: 91xxxx6011, time: 2025-08-28 20:54:39, lat: 4x.xxx28, lon: 1.xxxx2, course: 255.0
The above IP seams to be the IP of my tracker.
Then tried with:
<SPBSJ*P:BSJGPS*D:300> Means normally 300 min pause. But here 20 min pause and then around 20-25 entries.
With ACC OFF still to much traffic, with ACC ON every 2 sec. an entry, so unusable.
After sending SLEEP0000 00 to the tracker (instead of SLEEP0000 0 ), there are hardly any "24..." messages any more. So this seems to be much better.
But now I keep on getting positions every 3 minutes, even after I resend 8090000 600 and 8050000 600 (10 minutes interval).
Settings are confirmed with RCONF