TK103B - BRAZIL - GPRS - OFF

Hi folks

I'm trying to set up the trackers "Tk103b" with operator's chip.

steps:

begin123456                      - start the tracker
admin123456 61988776655          - set up cellphone number
GPRS123456                       - connect GPRS
Load20180117                     - set up date
time zone -3                     - set time
adminip123456 177.97.42.216 8082 - configuring the server to receive messages
APN123456 zap.vivo.com.br        - APN config
UP123456 user pass               - configure user and password
GPRS123456                       - connect GPRS
check123456                      - Status

The return from last command is "GPRS: OFF".
I tried these commands on different orders and even then I can not synchronize my device with the server.
By SMS everything works without problems.
The chips already have credit to communicate via GPRS.
I am in the capital of the state and here has internet avaliable
Could anyone guide me?

Note: I can synchronize my phone with the application of the traccar with server tracker, then, the server is working.

thks guys


Pessoal, estou tentando configurar os 3 rastreadores "Rastreador Gps Controle Remoto Tk103b Bloqueador Veicular", com chip´s da operadora vivo.

Segui os seguintes passos:

begin123456                      - iniciar o rastreador
admin123456 61988776655          - configurar meu celular
GPRS123456                       - ligar GPRS
Load20180117                     - configurar a data
time zone -3                     - configurar a hora
adminip123456 177.97.42.216 8082 - configurando servidor que receberá as mensagens do rastreador
APN123456 zap.vivo.com.br        - configura APN vivo
UP123456 vivo vivo               - configura usuario e senha
GPRS123456                       - ligar GPRS
check123456

No retorno deste ultimo comando sempre recebo "GPRS: OFF".
Já tentei estes comandos em diversas ordens diferentes e mesmo assim não consigo sincronizar meu rastreador com o servidor.
Por SMS tudo funciona sem problemas.
Os chip´s já possuem credito para comunicar via GPRS.
Estou na capital do estado e aqui possui internet no local do teste.
Alguém saberia me orientar?

obs: Consigo sincronizar meu celular com o aplicativo da traccar, apontando para o IP do servidor e o servidor encontra o celular, assim já sei que o servidor está funcionando corretamente.

Obrigado.

PROBLEMA RESOLVIDO - SOLVED.

Pessoal, por incrível que pareça o meu rastreador tk103b tem algumas configurações estranhas, mas que funcionaram com sucesso.

Ponto mais importante: O APN e os usuários não são os que encontrei no site da operadora.
Operadora: VIVO BRASIL

Passo a passo para funcionar:

CONFIGURANDO SERVIDOR - CONFIGURATION SERVER

    INSTALAR/INSTALL JDK JAVA (x86 or x64)
    INSTALAR/INSTALL TRACCAR (x86 or x64)
    WINDOWS FIREWALL: 
                          LIBERAR AS PORTAS 8082 (ACESSO WEB) e 5001 (RASTREADOR)
                         PODE-SE LIBERAR TODAS AS PORTAS DE UMA VEZ TAMBÉM
                          OPEN THESES PORTS 8082 (WEB) and 5001 (TRACKER DEVICE)
                          OR U CAN OPEN ALL PORTS OF WINDOWS FIREWALL
    INICIALIZANDO O SERVIÇO NO WINDOWS: SERVIÇOS > TRACCAR > INICIAR : ISTO INICIARÁ O SERVIDOR
    STARTING SERVICE: SERVICE > TRACCAR > START

    SALVAR O IP ATRAVÉS DO SITE http://www.meuip.com.br/ OU command.exe
        GET IP IN http://www.meuip.com.br/

CONFIGURANDO RASTREADOR - CONFIGURE TRACKER DEVICE
    reset123456
    begin123456
    acc123456
    move123456
    admin123456 619811919944
    PARA VIVO - TO MY MOBILE COMPANY
        APN123456 cmnet
        UP123456
    adminip xxx.xxx.xxx.xxx yyyy
    adminip 177.205.88.163 5001
        GPRS123456
Willian Oliveira5 years ago

Oliveria, boa tarde.
Para você funcionou o cmnet para vivo?

Turbovix5 years ago

For those who have difficulty activating GPRS on COBAN trackers, follow these instructions!

Enable gprs = gprs123456 1,1
Set up apn = apn123456 gprs.oi.com.br
If your carrier needs login = up123456 oi oi

Hola a todos.. respecto a lo comentado por Turbovix solo una aclaración.
gprs123456 1,1 --> Habilita el modo GPRS para UDP
gpsr123456 0,0 --> Habilita el modo GPSRS para TCP

en mi caso todos mis dispositivos utilizan TCP por que es mas seguro y te aseguras la recepción de todos los paquetes de información.

Saludos!!