receive ( Password error!) message from GPS device (TR06) ( TK06) ( TG06)

AbdullahHaraz4 years ago

when sending SMS to the number of my GPS devices likes (TR06) ( TK06) ( TG06) it is reply with ( Password error!) .
How to get information from these devices ?! or How to hard reset the device to the default .

tecseguridad4 years ago

Hello, this device is compatible with tk103? Do you have an example of some comands that you use?

AbdullahHaraz4 years ago

TR06 & TG06 >> Restore to factory setting FACTORY#
Check parameter PARAM#
Check location WHERE#
Check status STATUS#

AbdullahHaraz4 years ago

Not the same as TK103

tecseguridad4 years ago

when you send FACTORY# still doesn´t work? Because i see that model don´t have any password

AbdullahHaraz4 years ago

yes FACTORY or any of other command not works and the same reply for all are password error! . for all the devices that I have .

tecseguridad4 years ago

So maybe are note the correct commands

tecseguridad4 years ago

try #begin#123456#

AbdullahHaraz4 years ago

NO . it is the same in the Catalog .

tecseguridad4 years ago

you should try, in this model g06 protocol there is many firmwares and externaly looks like same

tecseguridad4 years ago

by logic, If the the tracker is expecting a password the command must have a password

tecseguridad4 years ago

this is a check to that model with other firmware version

CXSZ,000000#

Usama Naeema year ago

when sending SMS to the number of my GPS devices likes (TR06) ( TK06) ( TG06) it is reply with ( Password error!) .
How to get information from these devices ?! or How to hard reset the device to the default .

Usama Naeema year ago

waiting for humble response