ST 901- copy, Tracker King app to Traccar manager
Do you get any reply? The clones usually have a completely different syntax.
Try "RCONF", if you get a reply, then it is an original.
if not, try "CXZT" next, what do you get?
If not reply,then
"check123456"
if not then
"PARAM#"
I only got respond to CXZT.
J14_M216_GT06_418_V4.18*ID:864943043842042*185.119.17.42:5023*0.0.0.0*A:iot.1nce.net*G:A|0*DCS:25*POW:1*ACC:1*F:30*R:15|75382|3638*S:180|0*BAT:3.98V
This is respond. I searched whle internet and didn't found that comand. Do You maybe know, based on this what are other comands?
Hi,
the whole internet? You might have missed the German sites?
Try to translate this one:
https://www.my-gps.org/gps-tracker/anleitung/292-st901-anleitung
Let me know if you can handle it, the screenshots should help, too.
Hahaha, okay, not the whole thing. But somehow I didn’t check the German ones.
But this really helped me a lot. The SMS "CXZT" works, but the others don’t — for example, I managed to change the IP and port using the SMS "SERVER:0,185.119.17.118,5023,0".
In any case, thank you so much! It finally worked after month of struggle. You saved me.
Very good, thank you.
Where have you found the Server command?
Hi everyone,
I need a little help. Two years ago, I bought what turned out to be a clone (I didn’t know it was a clone at the time) of the ST-901 GPS tracker. It worked perfectly fine with the TrackerKing app for two years. Now, when I try to log in to the app, it says "Device Expired." From what I found on Google, this seems to be a time limit they impose, and then the device stops working.
Later on, I bought 5 more devices from SinoTrack and successfully switched them to Traccar, but this one device is left and it’s not responding. The device is online and receives SMS commands. I tried changing the IP address and port using the SMS commands provided in the manual, but it doesn’t react to them.
Has anyone managed to transfer this clone device to Traccar, and if so, which SMS commands did you use?
Thanks!