Hi,
We are running Traccar on our local server and added a Teltonika FMC125 device. It worked at first, but now we have two problems:
1- The device was online for a few days, but now its status in Traccar shows “Offline.” The tracker itself still has power, a good 4G signal, and correct GPRS settings. The same setup works fine with one of your demo devices.
1- When the device was online, Traccar only showed basic data — location, speed, odometer, routes, and trips. Input1 always shows “No,” and the Spent Fuel column in the Summary tab is empty.
We connected the vehicle’s analog fuel sensor wire to AIN1, calibrated the LLS, and turned on the AIN1 I/O using Teltonika’s instructions, but the data still doesn’t appear in Traccar.
Can you please help us understand why this is happening or suggest what we should check next?
Hello Anton,
I got the guidelines you pointed out to troubleshoot. Could you please provide further guidance to follow for the fuel issues?
You can use computed attributes to convert raw attribute to the fuel value.
Hi,
We are running Traccar on our local server and added a Teltonika FMC125 device. It worked at first, but now we have two problems:
1- The device was online for a few days, but now its status in Traccar shows “Offline.” The tracker itself still has power, a good 4G signal, and correct GPRS settings. The same setup works fine with one of your demo devices.
1- When the device was online, Traccar only showed basic data — location, speed, odometer, routes, and trips. Input1 always shows “No,” and the Spent Fuel column in the Summary tab is empty.
We connected the vehicle’s analog fuel sensor wire to AIN1, calibrated the LLS, and turned on the AIN1 I/O using Teltonika’s instructions, but the data still doesn’t appear in Traccar.
Can you please help us understand why this is happening or suggest what we should check next?