device 8750 skypatrol

juan korth6 years ago

hi anton:

what are I doing wrong?

My log

(only found port 5008)

2018-11-05 16:55:19 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001a000a08002020202020303131373232303031343435383338
2018-11-05 16:55:19 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c0005020000000016002aa509cb9707ffa71276001606b30228c6
2018-11-05 16:55:20 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c0005020000000015002aa509cb9707ffa71276001606b30228c6
2018-11-05 16:55:21 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c000502000000000d002aa509cb9707ffa71276001606b30228c6
2018-11-05 16:55:22 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c000502000000000d002aa509cb9707ffa71276001606b30228c6
2018-11-05 16:55:23 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c000502000000000d002aa509cb9707ffa71276001606b30228c6
2018-11-05 16:55:23 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c000502000000000d00c7ae01cb9687ffa714460000000002e771
2018-11-05 16:55:24 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c000502000000000d00c7ae09cb9667ffa7144e0000000002e926
2018-11-05 16:55:25 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c000502000000000d00c7ae09cb966effa714520000000002e9c1
2018-11-05 16:55:26 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c000502000000000d00c7ae01cb9694ffa7144b0000000002ed4c
2018-11-05 16:55:27 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c000502000000000d00c7ae01cb968fffa714440000000002ef3f
2018-11-05 16:55:28 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c000502000000000d00c7ae01cb9692ffa714450000000002f134
2018-11-05 16:55:28 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c000502000000000d00c7ae01cb9691ffa714450000000002f329
2018-11-05 16:55:29 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c000502000000000d00c7ae01cb9692ffa714450000000002f51f
2018-11-05 16:55:30 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c000502000000000d00c7ae01cb9692ffa714450000000002f714
2018-11-05 16:55:30 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c000502000000000d00c7ae01cb9692ffa714450000000002f909
2018-11-05 16:55:31 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c000502000000001600c7ae01cb9692ffa714460000000002fa89
2018-11-05 16:55:32 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c000502000000001500c7ae09cb9695ffa7144400000cfc02fa90
2018-11-05 16:55:33 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c000502000000000d00c7ae09cb9695ffa7144400000cfc02fa90
2018-11-05 16:55:34 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c000502000000001600c7ae09cb9695ffa7144400000cfc02fa90
2018-11-05 16:55:34 DEBUG: [58697ea3: 5008 < 181.117.216.148] HEX: 001c000502000000001500c7ae09cb9695ffa7144400000cfc02fa90    

my script

AT&F
AT$AREG=0
AT$MSGLOGCL
AT&w

AT$FRIEND=1,1,"190.***.**.***",5008,1

' claro
AT+CGDCONT=1,"IP","igprs.claro.com.ar"
AT$CGPCO=1,"clarogprs","clarogprs999",0 

'
AT$EVTIM1=40
'
'******* PERMITIR ENVIAR SMS **********
'
AT$SMSDA=1,"****************"
AT$SMSDA=2,"****************"
'
'
AT$IODBNC=1,2
AT$IODBNC=2,3
AT$IGNDBNC=4
AT$HBRST=4
AT$NETMON=15,1,0,0
'
'******* BOTON DE PANICO **********
'
AT$NETMON=15,1,0,0
AT$EVENT=11,1,0,1,1
AT$EVENT=11,3,52,11,556867
'
'******* REPORTE POR TIEMPO MOVIL APAGADO **********
'
AT$EVTIM1=40
AT$EVTIM2=300
AT$EVDEL=13
AT$EVENT=13,1,13,1,1
AT$EVENT=13,2,7,0,0
AT$EVENT=13,3,52,13,556867
'
'******* IGNITION ON **********
'
AT$EVDEL=14
AT$EVENT=14,0,7,1,1
AT$EVENT=14,3,52,14,556867
'
'******* IGNITION OFF **********
'
AT$EVDEL=15
AT$EVENT=15,0,7,0,0
AT$EVENT=15,3,52,15,556867
'
'******* REPORTE POR DISTANCIA **********
'
AT$EVDEL=16
AT$EVENT=16,0,16,500,1000000
AT$EVENT=16,2,7,1,1
AT$EVENT=16,3,52,16,1605443
AT$EVENT=16,3,44,1,0
AT$EVENT=16,3,43,3,0
'
'******* ALERTA MOVIMIENTO MOVIL APAGADO **********
'
AT$EVDEL=19
AT$EVENT=19,0,16,2000,1000000
AT$EVENT=19,2,7,0,0
AT$EVENT=19,3,52,19,556867
AT$EVENT=19,3,44,1,0
'
'******* VELOCIDAD EN NODOS (kmh/0,54) 80kmh **********
'
AT$EVENT=17,1,7,1,1
AT$EVENT=17,0,17,44,250
AT$EVENT=17,3,52,17,556867
'
'******* BATERIA INTERNA **********
'
AT$EVENT=21,1,3,1,1
AT$EVENT=21,3,52,21,556867
AT$EVENT=22,1,3,0,0
AT$EVENT=22,3,52,22,556867
'


'******* COMANDOS ALMACENADOS **********
'
AT$STOATEV=1,AT$ODOMETER=0
'

at$tcpapi=1
AT$AREG=2
AT&W
AT$RESET

I tried port 5021 but I dont get a data

thank you for your assistance.

juan korth6 years ago

There are a couple of limitations:
skypatrol protocol

Supported only UDP protocol
Only binary messages
Report Mask should be enabled (I don't know how)

thank

Anton Tananaev6 years ago

I would recommend to check with someone who uses same or similar device.

juan korth6 years ago

do not know anyone. anyway, thank you very much for this I will learn something new

Anton Tananaev6 years ago

What I meant was to find someone on forum who has this device, not someone who you personally know.

juan korth6 years ago

I'm consulting the location by SMS and I'm responding this ...

2018-11-11 12:47:05  INFO: [44994cf5: 5002 < 181.117.*.*] HEX: 001a000a08002020202020303131373232303031343435383338
2018-11-11 12:51:48  INFO: [44994cf5: 5002 < 181.117.*.*] HEX: 001c000502000000000d01b20e01cb9b13ffa7132c00000000025e11
2018-11-11 12:56:48  INFO: [44994cf5: 5002 < 181.117.*.*] HEX: 001c000502000000000d01b20e01cb9b14ffa7132b00000000026005
2018-11-11 13:01:48  INFO: [44994cf5: 5002 < 181.117.*.*] HEX: 001c000502000000000d01b20e01cb9b16ffa7131a00000000027195
2018-11-11 13:02:26  INFO: [44994cf5: 5002 < 181.117.*.*] HEX: 0017000002000d0a2b434d54493a2022534d222c310d0a   AT$GPSRD=16,1
2018-11-11 13:03:31  INFO: [44994cf5: 5002 < 181.117.*.*] HEX: 0017000002000d0a2b434d54493a2022534d222c320d0a   AT$GPSRD=16,1
2018-11-11 13:04:00  INFO: [44994cf5: 5002 < 181.117.*.*] HEX: 0017000002000d0a2b434d54493a2022534d222c330d0a   AT$GPSRD=16,1
2018-11-11 13:04:40  INFO: [44994cf5: 5002 < 181.117.*.*] HEX: 000e000002000d0a52494e470d0a     (call)
2018-11-11 13:05:13  INFO: [44994cf5: 5002 < 181.117.*.*] HEX: 000e000002000d0a52494e470d0a    (call)

I can not understand what port to use. since according to the page I would have to use the 5021. but having a dmz and having the firewall turned off is the only one that gives me radio silence

cristian4 years ago

hello anyone Knows how to receive notifications of skypatrol TT8750 like SOS? I donĀ“t know to configure Computed Attributes for this device. I just need to receive SOS notifications.

Thanks