Have you read following page?
https://www.traccar.org/clones/
Also, have you followed troubleshooting?
Hi Anton, thank you for the quick reply. I looked at this page, and followed troubleshooting. I changed all the ports but I couldn't make it work. I don't know if the device only sends the location when ACC is on. It returns the location by sending an SMS command regularly. If you assume the device is using some of these ports then I will try everything again with ACC on. In the server log file I mostly see this:
2020-07-27 20:11:30 DEBUG: [3F0B06BA: 5023 < 79.143.111.140] HEX: 676701000b0008086520503832603800
2020-07-27 20:11:30 DEBUG: [3F0B06BA: 5023 < 79.143.111.140] HEX: 676702001b00095f1f18dd04894d9802063dd4000000012900014eeb00054301
2020-07-27 20:27:21 DEBUG: [8052404D: 5023 < 79.143.111.235] HEX: 676702001b004d5f1f1c9604895ae8020611703a010e012900014eeb00063903
2020-07-27 20:28:01 DEBUG: [8052404D: 5023 < 79.143.111.235] HEX: 676702001b005d5f1f1cbe048957f00205eee00a0159012900014eeb00064203
Try eelink protocol.
It works! Thank you very much Anton!
Hey Dejan, what port did you end up using to connect? Also what identifier did you use? The full IMEI? I have the same device and I cannot get it to connect.
For anyone wondering, port 5056 and full IMEI as the identifier for the G500M
Hello,
does anyone have experience with this cheap tracking device? Link below.
https://www.aliexpress.com/item/4000443950809.html?spm=a2g0s.9042311.0.0.62754c4dYXu6EK
I am trying to connect it to the Traccar Server but without success. I have contacted the supplier for technical documentation but there is no answer yet.
Regards,
Dejan