GT06 Dont work notification "Ignition on" on system.

Hello, I have the gt06 device in operation on the traccar.
But the ignition on / off notification does not work. Not by email, nor by platform.
What can it be?

Have you checked if it's decoded?

Hello Anton,
I have the same problem, since I migrated from version 3.17 to 4.0 ignition on / off notifications are not working. Not by email, nor by platform.
I am working with the GT06 protocol

Attached logs

2018-10-18 08:33:49  INFO: [06819c3f] connected
2018-10-18 08:33:49  INFO: [06819c3f: 5023 < 181.188.200.102] HEX: 78780d0103598570808824180001d7500d0a
2018-10-18 08:33:49  INFO: [06819c3f: 5023 > 181.188.200.102] HEX: 787805010001d9dc0d0a
2018-10-18 08:33:50  INFO: [06819c3f: 5023 < 181.188.200.102] HEX: 78780a130604040002000277a40d0a
2018-10-18 08:33:50  INFO: [06819c3f: 5023 > 181.188.200.102] HEX: 787805130002db6a0d0a
2018-10-18 08:33:52  INFO: [06819c3f: 5023 < 181.188.200.102] HEX: 79790020940a035985708088241807400051156675338959300450504200612f00032bdb0d0a
2018-10-18 08:33:54  INFO: [06819c3f: 5023 < 181.188.200.102] HEX: 7979003d9404414c4d313d37353b414c4d323d44353b414c4d333d35463b535441313d34333b4459443d30343b46454e43453d46454e43452c4f46463b000412df0d0a
2018-10-18 08:33:59  INFO: [06819c3f: 5023 < 181.188.200.102] HEX: 78782312120a120d213ac30004c2cc086bb81c00c81402e4007597007c4c00000000000533830d0a
2018-10-18 08:33:59  INFO: [06819c3f: 5023 > 181.188.200.102] HEX: 787805120005f5090d0a
2018-10-18 08:34:04  INFO: [06819c3f: 5023 < 181.188.200.102] HEX: 78782312120a120d2203c8000500f4086bb9de00d83002e4007597007c4c000000000006a6170d0a
2018-10-18 08:34:04  INFO: [06819c3f: 5023 > 181.188.200.102] HEX: 787805120006c7920d0a
2018-10-18 08:34:04  INFO: [06819c3f] id: 359857080882418, time: 2018-10-18 08:34:03, lat: -0.18218, lon: -78.48759, course: 48.0
2018-10-18 08:35:29  INFO: [06819c3f: 5023 < 181.188.200.102] HEX: 78782312120a120d231cc80004f872086bb12620d80c02e4007597007c4c000000000007cae60d0a
2018-10-18 08:35:29  INFO: [06819c3f: 5023 > 181.188.200.102] HEX: 787805120007d61b0d0a
2018-10-18 08:35:29  INFO: [06819c3f] id: 359857080882418, time: 2018-10-18 08:35:28, lat: -0.18097, lon: -78.48635, speed: 17.3, course: 12.0

I look forward to your prompt help from always
Regards,
oM

Same question. Also note that it has to be present in two consecutive messages, unless you enable attribute copying.

Hi Anton,
Thanks for your prompt response.
As I commented in version 3.17 if it worked and I have not changed the device and I dont enable attribute copying.
In 4.0 it stopped working.
These are the parameters that I have configured in the traccar.xml file.

    <!-- Filters -->
    <entry key='filter.enable'>true</entry>
    <entry key='filter.invalid'>true</entry>
    <entry key='filter.zero'>true</entry>
    <entry key='filter.distance'>20</entry>
    <entry key='filter.duplicate'>true</entry>
    <entry key='filter.maxSpeed'>130</entry>
    <entry key='coordinates.minError'>20</entry>
    <entry key='coordinates.maxError'>30000</entry>
    <entry key='filter.future'>86400</entry>
    <entry key='status.timeout'>28800</entry>

Regards,
oM

Decoded? in the system log ok?
my gt06 gave problem and I will exchange for new one. As soon as I arrive, I'll do some further testing. hey OM, have you managed to make this notification work again? thank you