ITS140 - Ignition, Power, Harsh brakes etc. attributes are missing

Charmi Bansal 7 years ago

In the database we are not getting many attributes from ITS140 packet.

Below is the decoded value using the hex decoder of traccar

$,1,HT,2,NR,01,L,863502638863643,KN02A1525,1,02032019,053608,23.0204820,N,72.5234317,E,0.000,251.30,11,61.8,1.22,0.89,IdeaP,0,1,13.5,4.329,0,NA,29,404,24,4650,287a,31,553,5278,21,553,5279,20,4650,3fb7,20,553,5277,0000,00,9,252,*5,5,F#
  • $ -- Start Character
  • 1 -- Packet Identifier
  • HT -- Vendor ID
  • 2 -- Firmware Version
  • NR -- Packet Type (There are multiple packet types as per the document)
  • 01 -- Alert ID
  • L -- Packet Status (L- Live and H- Historic)
  • 863502638863643 -- IMEI
  • KN02A1525-- Vehicle Reg No.
  • 1 -- GPS Fix
  • 02032019 -- Date
  • 053608 -- Time
  • 23.0204820 -- Latitude
  • N -- Latitude Direction
  • 72.5234317 -- Longitude
  • E -- Longitude Direction
  • 0.000 -- Speed
  • 251.30 -- Heading
  • 11 -- No. of Satellites
  • 61.8 -- Altitude
  • 1.22 -- PDOP
  • 0.89 -- HDOP
  • IdeaP -- Network Operator Name
  • 0 -- Ignition
  • 1 -- Main Power Status
  • 13.5 -- Main Input Voltage
  • 4.329 -- Internal Battery Voltage
  • 0 -- Emergency Status
  • NA -- Tamper Alert
  • 29 -- GSM Signal Strength
  • 404 -- MCC
  • 24 -- MNC
  • 4650 -- LAC
  • 287a -- Cell ID
  • End Character
Charmi Bansal 7 years ago

Hello,

Can Anybody please help into this matter ?

Due to lack of these attributes we are not able to have device ignition, power attributes and not able to generate events, notification also.