J14 Clone
Have you tried on a subscription service? What port have you tried and what's the device id?
Hello, thanks for responding
Yes, I tried on a subscription service
The device ID is 10808011171
And i tried the following port : 5001 - 5002 - 5006 - 5013 - 5015 - 5023 - 5036 - 5093 - (and today 7711)
Let me know if you need the IP of the subscription and the IMEI of the device
The device id you should be using is 010808011171 and the port is 5015.
Thanks a lot mate
It worked
just a question, why do we need to add 0 before the ID? Does the ID always need to be 12 digits? If so, say I have a device with 10 digits ID, do I need to add 2 "0" in the beginning?
The device is reporting it like that.
Ha ok, I understand
Damn, the info I got in the status SMS response was wrong then (It's a clone so maybe it's not surprising), but hey it works now :)
Again, than you very much Anton, I was trying to solve this for almost 2 days now
Hello,
)
does anyone have successfully added a clone J14 to the web interface? (like this one but with only 2 wire
I can configure the ip and port via SMS command, with SZCS#SERVIP=XX.XX.XX.XX#SERVPORT=XXXX
from factory, the configuration was IP = 15.39gps.com / Port = 7711 and it works with the website https://www.39gps.com/
Changed it to the IP provided in the registration email for the shared server and tested with all the ports in the https://www.traccar.org/clones/ section.
I also created 3 devices with the ID, the IMEI and the variant of the IMEI with the 11 last digit + a 0 in the beginning.
Device always appear offline
The last port I didn't test is the original 7711 but it seems blocked for the IP of the shared server if i check https://www.traccar.org/port-check/
Is there something else I can try? or this clone is juste garbage and I need to purchase another model of tracker?
Thanks in advance