Hi few days ago i've bought gt06 clone with tk103 proto on 5002 port. Thanks to documentation on this site i 've installed and configured traccar and almost everything works properly.. Only thing i have a problem with is a status of relay which is not changing in webapp. Tracker sends following messages :
for idle state of relay:
*.9282E000.0173707000.0000000010L00000000)
for activated state
*.9282E000.0173737000.0000000110L00000000)
I've got protocol specification from supplier but i have found same file for tk103 on this site .
Any ideas what is wrong?
Thank you for your help.
Regards.
It doesn't say anything about relay in the document, as far as I can see. So you probably need to get an updated document.
Hi few days ago i've bought gt06 clone with tk103 proto on 5002 port. Thanks to documentation on this site i 've installed and configured traccar and almost everything works properly.. Only thing i have a problem with is a status of relay which is not changing in webapp. Tracker sends following messages :
for idle state of relay:
for activated state
I've got protocol specification from supplier but i have found same file for tk103 on this site .
Any ideas what is wrong?
Thank you for your help.
Regards.