Port check for tracker CCTR 830G
It's definitely not H02 protocol. Try other common ports:
Hello Anton,
I already try these ports without success
Which is strange, I try 2 different reseller with the same problem
possible change in H02 protocol?
Any idea?
I try the HEX decoder and result is not very good but I can see the model of the tracker
It's definitely not H02 protocol.
it is possible it is not compatible at all?
impossible to know with the hex given?
It would be easier if had a protocol documentation for it.
You can also just ask your device vendor for the port to use with Traccar.
is it a problem of port if I have a decoder HEX like this:
[binary data]
You have the same device as I have, with same problem. Only protocol documentation I found that seems to match is here http://www.999gps.org/protocol/CC888_EZcarsharing_T-Box_Communication_Protocol-V5.2-20200104.pdf
Hello,
yes it seems to have many changed
Anton, is it ok for you?
That's Huabao protocol, as far as I can tell.
I already try this protocol without success
Yeah, i get the following error when using huabao protocol
error - readerIndex: 180, writerIndex: 61 (expected: 0 <= readerIndex <= writerIndex <= capacity(61)) - IndexOutOfBoundsException (... < HuabaoProtocolDecoder:321 < *:173 < ExtendedObjectDecoder:51 < ... < WrapperContext:102 < ...)
I have a reply of manufacturer
we need to update the firmware to be traccar compatible!
try this command:
UPGRADEMAIN*12345678*a.igps.info,2510
Did you ever get it working?
Hello,
i have several tracker CCTR 830G and just order a new batch but not recognized
My old tracker is on port 5013 but doesn't work on new.
could you help me to find the tracker?
in log I have a trame
the tracker id is 2000134466