REACHFAR RF-V51 config parameters
Yes, Just let me know, when i have time i will respond. Just start by answering the above questions.
Ps. Which country are you in?
@Track-trace, Hello again, done! i just send the message as you told me to and now is working more and less fine, but testing the device the shortest update time is 1 (one) min, less than that the device crashes. now I have to test the other commands to see if they works as the upload's coammands. I am from Argentina. Sorry for the late, if you want we can continue this after your vacations. THANK YOU VERY VERY MUCH. Enjoy your vacations!!!
The following commands work with my RF-V51:
pw,123456,center,number# (Set the master number)
After entering the master number (center), all commands work without entering the password pw123456.
ip,xx.xx.xx.xx,5093# (IP and Port setting for Traccar (xx.xx.xx.xx -> your server ip or domain)
ip,a.igps123.com,8888# (IP and Port original setting for the AnyTracking App)
apn,pinternet.interkom.de# (Set apn, here for Provider "Netzclub", Germany)
sos1,number# (Set Emergency contact number 1 )
sos2,number# (Set Emergency contact number 2 )
sos3,number# (Set Emergency contact number 3 )
ts# (device information)
find# (let the tracker ring)
Has anyone found out which command can be used to retrieve the location? dw# url# or where# doesn`t work. The support is not very helpful, has written that it is not possible with this model. I can't really believe that.
If your device is connected to traccar server, to request the position from the device you can send the command: cr
@Track-trace, many thanks for the tip. It works and helps me really.
@heiko,
Ok, i wonder though why do you send these commands through sms while once the device is connected you can just send it from the server as custom command through the popup window.
I'm still in the beginner's phase and have only been marginally interested in commands. But now I'm starting to understand more about it. ;-) Thanks.
Hi, I have the same RF-V51 (firmware: C403HA_RFHZ_V51_04R6_V1.8). I confirmed the correct APN (internet.itelcel.com, Telcel/Mexico MVNO) works fine when tested in a phone. I sent pw,123456,apn,internet.itelcel.com,,,# (also tried with MCC/MNC 33420 and 334020) and rebooted the device, but ts# still shows NET:NO with a changing error code (74, then 77, now 51) instead of connecting. Never received an "apn OK!" confirmation SMS. Does anyone know what these NET error codes mean, or the exact working APN command syntax for this firmware?
Do you get an sms confirmation when you send the sms command without the password? like: apn,internet.itelcel.com,,,334020#
And i guess NET:NO with a changing error code (74, then 77, now 51). These values show a received signal strength.
Yes I receive a confiration SMS when I send apn,internet.itelcel.com,,,334020#
Ok, so does it work for you ? I wonder why you did not confirm if it solved the issue ?
Were you able to set the ip and port also ?
Still not able to connect to NET so device is still not connected in traccar
Thanks
can you send what the device reports when you send this sms: pw,123456,ts#
oh! @Track-trace vacations are sacred! thank you very much for your help. I wil try to do what are you telling to me. I don't want to bother you more with this, I appreciate very much your help... I'll let you know how it went.