sensor/ microcontroller/GPS and GSM

has 8 years ago

Good Day,‎
I have handmade microcontroller board with GPS and GSM modules, ‎this board measure the temperature. My goals are:‎
‎1-‎ Track this board on Traccar
‎2-‎ Send the temperature values to the traccar demo server
‎3-‎ ‎ Finally, see the online data of GPS location (on map) and the ‎temperature values on demo server.‎
Therefore, how I can make this goal. Did the free demo server is ‎sufficient? How data frame is prepared? ‎

Anton Tananaev 8 years ago

You can use any of supported protocols.

has 7 years ago

Dear Anton,
Many thank for all of your reply and help.
my board gps module is GTPA010 which used NMEA 0183 protocol.
an example of data sentence is ($GPRMC,064951.000,A,2307.1256,N,12016.4438,E,0.03,165.48,260406,3.05,W,A*2C).
but unfortunately, the traccar used osmand protocol. therefore, how can i used the NMEA 0183 protocol in traccar, because i can not modify my board to use osmand protocol?

Anton Tananaev 7 years ago

NMEA doesn't have any device identification information.