ST-902 (Sinotrack)

I have a Sinotrack ST-902 but still shows OFFLINE on the Traccar SW main page

i did a rconf by SMS and get the following info

ST-902,ID:9171554044,PW:0000,U1:,U2:,U3:,MODE:GPRS,DAILY:OFF,POWER ALARM:OFF,ACCSMS:OFF,ACCCALL:OFF,GEO FENCE:OFF,OVER SPEED:OFF,VOICE:ON,SH
AKE ALARM:OFF,SLEEP:OFF,APN:kotaa,,,IP:202.65.32.22:5013,TIME:30s,TIME ZONE:0.0

All my trackers are ok

Added the Device identifier as according to the device ID:9171554044

Anything else i am missing maybe on the traccar SW

how do you reconf the device ?
did you send the above string as one SMS to the device ?

thanks in advance

For us we only config the device with following command by SMS

Working mode - GPRS mode

7100000

APN

8030000 kotaa

Server IP address and port

8040000 202.65.32.22 5013

The command "rconf" is to read config

Note: mention above thread "All my tracker are ok" = These are calamp LMU20G500-G1000

For these Sinotrack ST-902

When calling the device it replys the call with a GPS positioning

as shown
http://maps.google.com/maps?q=S21.20820,W159.77734 Date:2020-9-30 Time:18:43 ID:9171554044 STATE:Phone ACC OFF Fix:A Speed:0KM/H Bat:5

I got this one above it is to do with the ports but i use the ports that allowed 5055 and hex is shown in the logs

2a48512c393137313535343034342c56312c3230323634322c412c323131322e343837352c532c31353934362e363338332c572c3030302e30302c3333342c3330303932302c46464646424246462c3534382c30312c322c3230313223

translated the HEX

*HQ,9171554044,V1,202642,A,2112.4875,S,15946.6383,W,000.00,334,300920,FFFFBBFF,548,01,2,2012#

But the Traccar manager still shows it is offline for this device
Sinotrack - Offline

What is the next step???

That's H02 protocol. You should be using port 5013.

Hello Anton,

This port 5013 is this tcp or udp assignment for traccar server

It supports both.

Hello Anton,

Thank you indeed for your support... It is no working...

Sinotrack ST-902 work magically on Traccar platform

Hello Anton,

I have receive few more of Sinotrack devices ST-902W these are the 3G/4G devices... but could not decode the h02 hex seen in the logs

2020-11-04 10:48:06  INFO: [a0d5a116: h02 < 202.65.46.3] HEX: 7e0100002c0191715320390000000000003730313132542d333030000000000000000000000000000000313533323033390131353332303339f87e
2020-11-04 10:48:07  INFO: [48f9ec7d: h02 < 202.65.46.3] HEX: 7e0100002c0191715318460170000000003730313132542d333030000000000000000000000000000000313533313834360131353331383436ce7e

Any reason why... the port used by the ST-902W is 5015 also tried 5013 same results

I don't see port 5015 in your logs.

Please check this one..

Log from the traccar:

2020-11-04 13:59:52  INFO: [8b829dfe: h02 < 202.65.46.3] HEX: 7e0003000001917153184601df317e
2020-11-04 13:59:54  INFO: [8b829dfe: h02 < 202.65.46.3] HEX: 7e0100002c01917153184601e1000000003730313132542d3330300000000000000000000000000000003135333138343601313533313834365f7e
2020-11-04 14:00:05  INFO: [bd41ce1a: h02 < 202.65.46.3] HEX: 7e0100002c01917153184601e3000000003730313132542d3330300000000000000000000000000000003135333138343601313533313834365d7e

From the tracker setup

ST-902 3G/4G,ID:19171531846,UP:0000,U1:,U2:,U3:,MODE:GPRS,DAILY:OFF,GEO FENCE:ON,OVER SPEED:OFF,VOICE:OFF,SHAKE ALARM:OFF,SLEEP MODE:OFF,APN:kotaa,,,IP:202.65.32.22:5015,GPRS UPLOAD TIME:10,1800TIME ZONE:+0

I still don't see port 5015. Your logs show that you are using H2 protocol (port 5013).

Hey Anton,

For port 5015 what will be the output or identifier in the logs.

It will be the corresponding protocol name, which is huabao.