ST-906ML - GPRS Time Interval

denkyem2 years ago

Hi all,

I have a ST-906ML and is working fine, but I tried to change the time interval it reports to traccar server and is not taking any effect.

I tried this:
805xxxx 15
809xxxx 450

It changes when I sent RCONF
ST906ML:V4.21,ID:XXXXXXX,UP:XXXX,U1:,U2:,U3:,MODE:GPRS,POWER ALARM:OFF,OVER SPEED:OFF,VOICE:OFF,SHAKE ALARM:OFF,GEO FENCE: OFF,SLEEP:2,ACC ALARM SMS: OFF,ACC ALARM CALL: OFF,APN:EM,,,IP:XXXXXXXXXXX,5013,GPRS UPLOAD TIME:20,450,TIME ZONE:E00

But keeps reporting every 20segs when ACC ON and 3 minutes when ACC OFF

Any tips?

Track-trace2 years ago

The most logic would be that you post a link to the protocol document if you have that.

denkyem2 years ago

I'm not very comfortable with the documentation, but I know that this tracker is using h02 protocol on port 5013.
At least is what I'm using and is reporting is location, ignition and powercut

I tried to read some protocol documents and manuals, but not must of a help.

Christian - Golfcourse tracking2 years ago

Hallo denkyem,
yes, I also have issues with this.
Maybe you can crosscheck: 805pass 3 will lead to error (imvalid command) so times below 4 secs seem not to work by principle.
But, and : I have a track (6 out of 500 points) where my 901 sends every 4 secs. and the rest of the track anything between 20 secs and 3 minutes.

Have you managed to get the trak on traccar? I was not able to manage any tracking plattform other than sinotrack.
Thanks Chris