Teltonika FMU130
Hi Pete, I am using too the FMU130 device but the latitude/longitud I receive 0.
How are resolve You this?
I confirm that FMU130 it's working 100%. It use the same protocol as FMB900 and others of Teltonika.
Hi Diego, you will need to make sure your device is configured properly using Teltonika configurator. For Teltonika devices you have the option to configure to send data “Always” or “After fix”. If always is selected you may receive data on Traccar server before the device received a fix. Traccar is working fine with FMU130 so your issue must be with the device Not the server.
sorry guys! it's working. the problem was a GPS signal into my office.
thanks a lot.
Hi Anton , just letting you know I am using Teltonika FMU130 devices on Traccar and they are working 100%. Since they are not on the Devices list I thought to share.