Hi, I have strange issue with T361 devices. I got a bunch of them from previous contract in the company where I work, unlocked them and tried to use one device on my personal Traccar server, where I had Coban 303 working perfectly. I'm not using OBD2 port on my vehicle, I have connected T361 directly on power pins on OBD2 connector. Device comes online and I can see it in Traccar, but trips are weird, like this one:
This was from my yesterday's trip from Greece to Serbia. Every couple of minutes, device sends near starting location in Greece and then continues to work normaly.
Also, T361 device does not send location when power is disconnected (battery is OK and I can see it blinking for couple of hours after power loss), so most of the times, last location is not precise.
T361 is configured with Ulbotech configurator (Windows software) via USB cable. Since that configurator has zilion available options, I have tried to change everything that sounds logical to me, but no success. Now I have it configured with all checkboxes disabled, only GPS server is filled, port 5072, TCP connection (UDP is not working) and 10sec/30min interval.
If someone knows why is this happening, please help. Also, if someone is willing to share screenshot of working configuration from T361 configurator, that would be nice :)
This looks like the device is sending data in the wrong order.
Hi, I have strange issue with T361 devices. I got a bunch of them from previous contract in the company where I work, unlocked them and tried to use one device on my personal Traccar server, where I had Coban 303 working perfectly. I'm not using OBD2 port on my vehicle, I have connected T361 directly on power pins on OBD2 connector. Device comes online and I can see it in Traccar, but trips are weird, like this one:
This was from my yesterday's trip from Greece to Serbia. Every couple of minutes, device sends near starting location in Greece and then continues to work normaly.
Also, T361 device does not send location when power is disconnected (battery is OK and I can see it blinking for couple of hours after power loss), so most of the times, last location is not precise.
T361 is configured with Ulbotech configurator (Windows software) via USB cable. Since that configurator has zilion available options, I have tried to change everything that sounds logical to me, but no success. Now I have it configured with all checkboxes disabled, only GPS server is filled, port 5072, TCP connection (UDP is not working) and 10sec/30min interval.
If someone knows why is this happening, please help. Also, if someone is willing to share screenshot of working configuration from T361 configurator, that would be nice :)