Unsupported commands

Pete Milliet6 years ago

Hi, I am very interested in using this software for a OBD Tracking Device I just purchased.
Are there some general commands I could send to the device to retrieve or change the IP & Port?
I purchased the Tracker from here https://www.jelocalise.fr/en/protect-my-vehicles/10-obd-gps-pour-vehicule.html

When I contacted them about using other GPS Software, they gave me this reply "Our products are designed to work only with our platform"

I disagree, I believe that if I could config to a different IP & Port, I could use this with a different GPS Software. Maybe I'm wrong.

Anyways, I was able to retrieve the sims phone number and was able to send and receive text. but no voice.

So, is their anything I could do to get this working with your software?

Thanks

Pete

jbaterdene6 years ago

http://huashengtelematics.com
https://www.traccar.org/devices/
Check port: 5111
https://www.traccar.org/protocols/
Check protocol docx:
OBD Device Protocol_V1.1.4_160526.docx
https://dl.dropboxusercontent.com/s/1nup09sp9pb5td6/OBD%20Device%20Protocol_V1.1.4_160526.docx

  1. 2G OBD GPS Tracker HS-600G
    http://www.huashengtelematics.com/post/GPSOBDTracker.html
    http://www.huashengtelematics.com/uploads/HS-600G_User_Manual.rar
  2. CDMA OBD GPS Tracker HS-2000C
    http://www.huashengtelematics.com/post/CDMAOBDTracker.html
  3. 3G OBD GPS Tracker HS-3000G
    http://www.huashengtelematics.com/post/3GOBDTracker.html
    http://www.huashengtelematics.com/uploads/HS-3000G_User_Manual.rar

TRY to use a sms command to change IP:

  1. Old Firmware:
    cwits,setipIP:PORT
  2. New Firmware:
    g1,setip,IP:PORT
    (Eg: g1,setip,139.159.44.26:7000
    You can also set domain name instead of IP)

TRY to use sms command to change APN:

  1. Old Firmware:
    cwits,setapnAPN
  2. New Firmware:
    g1,apn,APN

TRY to use a sms command to check parameters:

  1. Old Firmware:
    cwits,get
  2. New Firmware:
    g1,info
Pari Hasani5 years ago

Hi,

I found it on my log file. device is not shown in UI. any suggestion?
device: HS-3000G, server: traccar backend service run on my PC.

2019-04-22 09:25:50  INFO: [4f76d0b5] connected
2019-04-22 09:25:50  INFO: [4f76d0b5: 5111 < 5.212.145.64] HEX: c0010c003c0002000000000004020010a0014f42445f3347315f56332e370013a0043836373638383033373339303635390006a08700000006a0a1049cc0
2019-04-22 09:25:50  INFO: [4f76d0b5: 5111 > 5.212.145.64] HEX: c00100000c0003000000000004c0
2019-04-22 09:26:16  INFO: [4f76d0b5: 5111 < 5.212.145.64] HEX: c0010c003c0002000000000005020010a0014f42445f3347315f56332e370013a0043836373638383033373339303635390006a08700000006a0a1049fc0
2019-04-22 09:26:16  INFO: [4f76d0b5: 5111 > 5.212.145.64] HEX: c00100000c0003000000000005c0
2019-04-22 09:26:41  INFO: [4f76d0b5: 5111 < 5.212.145.64] HEX: c0010c00120060000000000006000600010100c0
2019-04-22 09:26:43  INFO: [4f76d0b5] disconnected
Toyi3 years ago

Hi Pari Hasani,
Did you solve your problem ? I have the same problem now.

Regards,