Hello,
Questions on setting up new users, I've read the documents on here i can find, and done some searching, however if i may ask some questions. Because i am seriously confused.
I've had everything set up and working, however i want to ensure i've done it the correct and clean way, ready for expansion. So i've deleted every notification from users and devices and am starting again.
When i'm setting a new user not associated with me, i believe i do this on my admin group, then link the device onto them as a user? I don't think i have any option to do anything than that, as new users are locked out from being admins.
Should i give all new users a group, or just keep them under MY admin and assign the device to them as a user?
I then believe i should have all my notification set in MY admin group, for example i place all them in 1 by 1 and then click "all devices" as below (i think this as if they are not, when i log in as the user, or go to devices, i have no notification options to select from)
Until i have a list like this
Is that correct? or should i not do the "all devices" reason being later on i want some users to be able to add in "ignition on/off", where as two wire customers, i don't want to have that option working only the "device moving" which i want all the devices to have the option to receive this notification or not.
- If the above is correct, where do i setup their notifications, so for example whilst still in my admin group if i want to set "device moving or computed attributes" do i do that by going to them as a user then clicking "user/connections/ then add to "connections" or "computed attributes" as the menu below?
Or do i do it on the DEVICE still from within MY admin window, so i go to the persons DEVICE the "connections" then add from the list as below, or as I've told the system to "all device" early on, is it added anyway, although it doesn't show it? Or do i do both?
Then when i log in as the new user under notifications i see nothing, will they get them anyway as its "all devices" in the main admin account, or is this what i have to do, go in and let them add or delete the ones they actually want push notifications from? That would be a good thing as some people want a lot, and some people want nothing.
Or is the step where i did "all devices" actually an issue, and i should add notifications to devices separate?
I'm sorry for the long post, i just want to do things the correct way and would appreciate the advice.
I'm now thinking, i still need to know if i add their device via my admin and link to them as a user, and if they should have there own group or not if people can answer this?
And once I've done that, i actually go in as the user, and add notifications they want to see, which then allows me to then as them onto the device and add it that way? Going for a ride around the block in the Mrs car that looks like Apollo 11 in the boot testing all this out.
A group is a group of devices, not users.
Hello,
Questions on setting up new users, I've read the documents on here i can find, and done some searching, however if i may ask some questions. Because i am seriously confused.
I've had everything set up and working, however i want to ensure i've done it the correct and clean way, ready for expansion. So i've deleted every notification from users and devices and am starting again.
When i'm setting a new user not associated with me, i believe i do this on my admin group, then link the device onto them as a user? I don't think i have any option to do anything than that, as new users are locked out from being admins.
Should i give all new users a group, or just keep them under MY admin and assign the device to them as a user?
I then believe i should have all my notification set in MY admin group, for example i place all them in 1 by 1 and then click "all devices" as below (i think this as if they are not, when i log in as the user, or go to devices, i have no notification options to select from)
Until i have a list like this
Is that correct? or should i not do the "all devices" reason being later on i want some users to be able to add in "ignition on/off", where as two wire customers, i don't want to have that option working only the "device moving" which i want all the devices to have the option to receive this notification or not.
Or do i do it on the DEVICE still from within MY admin window, so i go to the persons DEVICE the "connections" then add from the list as below, or as I've told the system to "all device" early on, is it added anyway, although it doesn't show it? Or do i do both?
Then when i log in as the new user under notifications i see nothing, will they get them anyway as its "all devices" in the main admin account, or is this what i have to do, go in and let them add or delete the ones they actually want push notifications from? That would be a good thing as some people want a lot, and some people want nothing.
Or is the step where i did "all devices" actually an issue, and i should add notifications to devices separate?
I'm sorry for the long post, i just want to do things the correct way and would appreciate the advice.