Xirgo XT2400 / XT2469

Hello,
I see that the XT2400 binary version is supported in traccar. However, I havent been able to find any details on how to get it connected.

There are 2 or 3 posts in the forum about the topic, but no conclusive data. Has anyone succeeded in getting this device to work?

1. I have pointed my device to my local instance on port 5138

2. I do see HEX data coming in the logs, so I know the device is connecting:

2021-10-20 20:27:36  INFO: [f863c88c: xt2400 < 31.210.232.53] HEX: 000b8d4afe0161707bb601c93398fa25375e0d98000004450e078a0018000000000003

1. I have edited the traccar.xml file and added the following line:

<entry key='xt2400.config'>
wycfg pcr[0] 000f01030406070809570a131217141005
</entry>

1. I have applied this same command to the tracking device itself

Does anyone know what changes need to be made to get this hardware to work on Traccar?

What you did seems correct, assuming config matches what you have on the device. So, you don't get any location data?

No, no location data.

I have added both the Serial Number and also the IMEI.

Also, I am running the latest firmware (AAa4-1133KB1.1-3c74751)

I had reset the device back to factory before configuring it (:udcmd factory)

Is that everything you see in the log?

2021-10-20 19:05:35  INFO: [c62df06b: xt2400 < 31.210.232.53] HEX: 000b8d4afe016170687601c93363fa2537370d4d000000000118000009080000000000008a0016000000000000000007
2021-10-20 19:07:09  INFO: [c62df06b: xt2400 < 31.210.232.53] HEX: 000b8d4afe01617068dc01c93368fa2537090d88000007ec0a088a0017000000000008
2021-10-20 19:07:19  INFO: [c62df06b: xt2400 < 31.210.232.53] HEX: 000b8d4afe00617068e701c9336cfa2536fe0da1000007ec0a098a0017000000000009
2021-10-20 19:40:12  INFO: [b13d231a] connected

How come message lengths are different?

I had changed the PCR on the device with another one I found on this form to see if it worked, but as you can see, it did not...

Did you change the config?

No, because immediately after I made the change to the device, I read further in that thread and you told the other user the "correct" pcr to use so I changed it back.

I have tested your sample with configuration and it turns out your config is incorrect. You are missing colon. It should be:

<entry key='xt2400.config'>
:wycfg pcr[0] 000f01030406070809570a131217141005
</entry>

Can you please link me to the place where you got this config from, so I fix it for future.

Here is the URL for the page that contained the incorrect code:

https://www.traccar.org/forums/topic/xt2469-configuration-issue/page/2/

I will give the new code a test and report back.

Tested, and this DOES work now that I corrected the missing colon.

Thank you!