Recent replies by imarinkovic

Link Quote Freshness
#109285 Swanhtet Just to add my 2 cents, this i… 10 months ago
#93669 Good to know! My name is Ivan from Chil… 2 years ago
#93668 Do you have the server in UTC time?, see… 2 years ago
#90101 Hi Datasoft, greetings from Chile. Ye… 2 years ago
#86769 Hi, I think Im facing same problem her… 3 years ago
#77646 Sorry Quade, I lost your question. Th… 3 years ago
#74166 I have same problem with a new bunch of … 3 years ago
#72651 After a lot analysis, we faced two probl… 4 years ago
#61832 Thats correct, but I cannot identify or… 5 years ago
#61829 Yes, the following. xml entry key… 5 years ago
#61819 Upgraded to 4.12, no change in behavior.… 5 years ago
#61779 Hello friends, I have the following prob… 5 years ago
#61553 Hi! Did you find a solution? Im facing … 5 years ago
#42286 Siempre debería hacerlo, a no ser que no… 7 years ago
#37120 Can you copy the Traccar log after execu… 7 years ago
#36905 Sorry, didnt see before. If you are … 7 years ago
#33017 About APN, get the information from your… 7 years ago
#33011 Check the APN setting, and confirm IP se… 7 years ago
#32845 Hi friends, can you help me to confirm … 7 years ago
#31384 Here in Portugal we only find SIM cards… 8 years ago
#31379 Try sending an SMS with the following: 7… 8 years ago
#28571 Juan, works great in Centos7. Now run… 8 years ago
#28201 Thanks Anton, Im checking all alternati… 8 years ago
#28154 Hi friends! POI works great!, but I don… 8 years ago
#27082 sleepxxxx 5 the device enters in a lo… 8 years ago
#27045 Michele, this is how I configure them… 8 years ago
#25637 Did you tried with proxyredirect … 8 years ago
#25616 Huuhtanen: If needed, I have the exact … 8 years ago
#25614 This is my working config for haproxy. P… 8 years ago
#25505 Thanks Anton.… 8 years ago
#25502 Hi friends, I was looking some informati… 8 years ago
#25501 So NGNIX is not running, probably becaus… 8 years ago
#25278 Hi Md Azharuddin Im using this: … 8 years ago
#25277 Great, Understood! Thanks again!… 8 years ago
#25275 Hi Anton, pretty sure is TCP. Return… 8 years ago
#25261 This link is working... http://marin… 8 years ago
#25258 Thanks! Im going to try that config thi… 8 years ago
#25256 Anton, thanks for answering. Thats cor… 8 years ago
#25230 Hi friends, this weekend I made upgra… 8 years ago
#24571 I had the same problem keeping knots in… 8 years ago
#21426 For all to know, the problem about Comm… 8 years ago
#21413 Sorry...sent before finish. Power cut wo… 8 years ago
#21412 Arturo, thats the way its supposed to w… 8 years ago
#21408 I can confirm in my case, with iTrac MT-… 8 years ago
#21407 Hi guys...Im facing the following probl… 8 years ago
#20490 Ok Anton, thanks for answering.… 8 years ago
#20480 Sorry for bringing this up again, but wh… 8 years ago
#18551 Great Anton, working Ok now. Thanks a l… 9 years ago
#14682 Hi friend! Im trying to reduce decimal… 9 years ago
#14668 Try port 5001...… 9 years ago