Remove password Queclink GL300

Jima year ago

Anyone know the password for Trackit247 branded GL320's ?

Default password doesn't work (not that I expected it to!)

boulba89a year ago

Hello
anybody can help me to find password or to reset to factory setting a gl320mg from SpySpot or one from Brickhouse security (called spark nano 7 but it is also a gl320mg). Thank you

Tracker Hackera year ago

Password for Brickhouse Spark Nano 7 is SN7gb37
To factory reset the device, including password, send the following SMS command:

AT+GTRTO=SN7gb37,4,,,,,1,FFFF$

monkeysoupa year ago

I tried "SN7gb37" for the Brickhouse Spark Nano 7 and it did not work, any other suggestions?

Thanks

Jardakoa year ago

Hello, does enybody the newest firmware for GL300N? Or download link for firmware GL300NR00A10V04M128_MIX? Thanks. Link from patebin does not work (for version A09 and A10).

monkeysoupa year ago

Try https://assetfleetgps.com/pages/firmware-updates, they have links to most models.

Jardakoa year ago

Thank you for your answer. I know about this page, but unfortunately there is nothing what I am looking for. On the 2nd page of this topic there are links for download, but now there do not exist. One of the last one should be A15V08, but I have got the manage tool for this version only, not firmware.

BRSa year ago

Anyone know the password for Americaloc devices?

Gktg9 months ago

Hello, I have a gv350ceu device. I need the manage tool application for this device. Thank you.

Tracker Hacker9 months ago

Don’t know if this will work or not but worth a try. Report back with success or failure.

https://qdc.queclink.com/share/s/lUo0Po03SJu8EjIw1i8-hQ

Gktg9 months ago

This application did not work. The device does not wake up. Could the problem be the cable I am using? I am sending you a picture of the cable I am using.

Gktg9 months ago

I use this cable, rs232 uart but I convert it to mini usb with a converter

Eslam zahran6 days ago

Hi all, anyone have the password of gl300nr00a13v24m128.

Tracker Hacker6 days ago

That is an older 2G device. If you have the Flash tools and firmware file, you can reset the config to default when upgrading the unit.

The default password for that device should be gl300. If it's a branded device (i.e.: Brickhouse, SpyTec, etc.) let us know the brand / provider and we might be able to provide a password for the device for that specific provider.

Eslam zahran6 days ago

The provider is ETIT in Egypt, also i tried many passwords with no result , could you share this version flash tool and firmware ?