Help with new setup please

Anton Tananaev6 years ago

You should start by looking at server logs and browser console logs.

Anton Tananaev6 years ago

Are you saying you don't have wrapper log file?

Sean6 years ago

is that what you need Anton?

Anton Tananaev6 years ago

I can see that you have a timeout which probably indicates that you don't have enough resources on your server. Also, you haven't provided browser console logs.

Sean6 years ago

2meg ram and 30gig HD thought would have been enough?

Anton Tananaev6 years ago

2MB RAM? Are you running Windows 95 there?

Sean6 years ago

no its a remote VPS running R8 server ????

Anton Tananaev6 years ago

Then maybe you meant 2GB RAM?

Sean6 years ago

Sorry yes

Anton Tananaev6 years ago

That might not be enough because Windows uses quite a bit of resources itself. Or you might need to adjust Java memory limits:

http://yajsw.sourceforge.net/YAJSW%20Configuration%20Parameters.html

Sean6 years ago

Ok will have a look Anton at the info you sent me, I was running another Server with 2gig ram and 40hd run well

Sean6 years ago

UPDATE

Anton I can now get traccar to run
I login to remote sever go to browser and localhost:8020 traccar runs fine, tells me software now running

if i go to my ip address of the new sever it will not see traccar

ie: http://xx.xxx.xx.xxx:8020 nothing happening

Anton Tananaev6 years ago

Why port is 8020? Are you sure you opened correct port on the firewall?

Sean6 years ago

port 8020 is the standard port when first installed?

will double check ports

THANK YOU

Anton Tananaev6 years ago

No, it's not. Can you please be more careful with information that you provide. You keep posting misinformation.