I've recently encountered an issue with Traccar's saved command notifications, specifically when attempting to use the "Test Channel" button. Despite having configured all the settings correctly using SMS, the saved commands do not seem to be working as expected.
Here's a brief overview of my setup:
I've configured saved commands for my devices within the Traccar platform.
configuration:
https://prnt.sc/sElcBW3mQEEl
These commands are designed to trigger specific actions (e.g., "cut off engine" or "resume engine") when certain events occur.
saved command:
https://prnt.sc/jk0XICHVxHas
I've set up notification channels to receive alerts and notifications for these saved commands.
Notification:
https://prnt.sc/lnsEYC5xo16m
However, when I attempt to use the "Test Channel" button within Traccar to check the notification and command execution, nothing seems to happen. I'm not receiving the expected notifications, and the commands are not being executed as intended.
I have double-checked my SMS configuration and ensured that the saved commands are correctly associated with the devices and events. The regular notifications (e.g., geofence alerts) are functioning as expected, which leads me to believe that the issue might be related specifically to the saved command notifications.
Has anyone else encountered a similar problem with saved commands and the "Test Channel" button? If so, I would greatly appreciate any guidance or suggestions on how to resolve this issue. I want to ensure that our Traccar setup is fully functional and that saved commands work as expected.
Test channel doesn't work with commands currently.
I've recently encountered an issue with Traccar's saved command notifications, specifically when attempting to use the "Test Channel" button. Despite having configured all the settings correctly using SMS, the saved commands do not seem to be working as expected.
Here's a brief overview of my setup:
I've configured saved commands for my devices within the Traccar platform.
configuration:
https://prnt.sc/sElcBW3mQEEl
These commands are designed to trigger specific actions (e.g., "cut off engine" or "resume engine") when certain events occur.
saved command:
https://prnt.sc/jk0XICHVxHas
I've set up notification channels to receive alerts and notifications for these saved commands.
Notification:
https://prnt.sc/lnsEYC5xo16m
However, when I attempt to use the "Test Channel" button within Traccar to check the notification and command execution, nothing seems to happen. I'm not receiving the expected notifications, and the commands are not being executed as intended.
I have double-checked my SMS configuration and ensured that the saved commands are correctly associated with the devices and events. The regular notifications (e.g., geofence alerts) are functioning as expected, which leads me to believe that the issue might be related specifically to the saved command notifications.
Has anyone else encountered a similar problem with saved commands and the "Test Channel" button? If so, I would greatly appreciate any guidance or suggestions on how to resolve this issue. I want to ensure that our Traccar setup is fully functional and that saved commands work as expected.