Can't find some Teltonika data sending parameters
Image is missing.
What about now?
If you don't see them on the details screen, it means your device is not sending them.
Okay, I'll have to double check the documentation and configuration.
But Traccar (I'm using 5.6) is able to read these io's from 10501 to 10541, correct?
Traccar should read all of the IO values.
Hi,
I'm trying to get my devices to display the exact same figures but they aren't available.
iurg have you been able to convert the driver card number from Deciaml to ASCII using computed attributes?
iurg did you get to the bottom of this?
Hi, yes and no!
I figured out that the devices are properly configured to retrieve these IOs from the tachograph.
But, when connecting the k-line on the back of the tacho you can't retrieve this information, only a reduced number of parameters.
To retrieve these parameters you have to use a different connection between tracker and tacho (front port k-line or tacho can), but I haven't tried that yet.
As for the driver card number, I haven't tried any conversion yet.
I have Teltonika devices configured to send different data parameters, and I can find all io's with 2 or 3 digits (for example io56, io89, io104. io136).
The problem is I need to get some parameters like these, for example:
How can I read these 5 digit io's?