Cantrack G06L - Vibration Notification

AlexG5 months ago

hello,

i recently add this device, as manufacter said me works with 5013 port, i tried at 5023 but nothing, so yes it works with h2 protocol except the vibration notification.

1)the trackers sleeping and only heartbeat send, its online all ok
2)when tracker vibrate i receive this at logs:

2a48512c3836393733313035333132333733332c56312c3131333131352c562c343033352e34353833372c4e2c30323235382e33323933392c452c3030302e30302c3030302c3238303432342c464646464633464623

2a48512c3836393733313035333132333733332c56312c3131333133372c412c343033352e34343136362c4e2c30323235382e34313335302c452c3030302e30302c3030302c3238303432342c464646464642464623

2a48512c3836393733313035333132333733332c56312c3131333135372c412c343033352e34343238312c4e2c30323235382e34313239332c452c3030302e30302c3030302c3238303432342c464646464642464623

3)then gps position and device time updated for the tracker at web but no vibrate alarm or something.

4)after the above 3 logs, then sends only heartbeat again :

2a48512c3836393733313035333132333733332c4854425423

its something not recognized by the protocol or the device not sending anything about vibration?

Anton Tananaev5 months ago

Very possible the vibration is not decoded because different H02-based devices use bits of status differently.

AlexG5 months ago

Can recognized and add it via the logs i send above? Can i add it alone or maybe you include it at next update?

Anton Tananaev5 months ago

You have to do it yourself. I already explained why we can't include it.

AlexG5 months ago

If i understand well, only for this specific model need to create copy of h02 protocol with other name and port but with other bits for vibration status only?
Something like that it works?

Anton Tananaev5 months ago

That will work, but there are probably easier options as well.

AlexG5 months ago

Other notifications of same device like ignition, geofence and power cut works ok

AlexG5 months ago

Easier options like what?