Cellocator

I have cellocator unit but it can work only over UDP. How to set the server to accept UDP for cellocator?

Is message format the same for TCP and UDP? Do you have protocol documentation?

Yes it is same. I have documentation for protocol.

Can you send it to me to double check? Email address is on support page.

I have added UDP support for Cellocator protocol. Here is a new build to try:

https://www.dropbox.com/s/cgmlansv32j3ii0/tracker-server.jar?dl=0

I try, but nothing happens. When I try to ping udp port 5033 with oder app, in log file I get message

2016-09-26 07:29:22  WARN: Unknown device - 1 (93.87.67.200)
2016-09-26 07:29:25 DEBUG: [F1A8B473: 5033 < 93.87.67.200] HEX: 72fe1d130000000000000002000186a00001977c0000000000000000000000000000000000000000
2016-09-26 07:29:25 DEBUG: [F1A8B473: 5033 > null] HEX: 4d434750040000000001000000000002000000000000000000000007
2016-09-26 07:29:25  WARN: [F1A8B473] error - NotYetConnectedException (... < CellocatorProtocolDecoder:67 < *:86 < ExtendedObjectDecoder:58 < ...)

When I try to turn GPS, nothing happens (no new entry in log). When I put other app to listen udp port 5033, I got message from GPS.

I replace jar file and reboot system / service.

The message that your device sends doesn't comply to the documentation that you provided earlier.

Sorry for misunderstanding. The message I sent was created in log when I test port 5033 with UDP port scanner. It is not message from the GPS. So port is ok. But when I put GPS on, no one message is received by the server. After that, i stopped the service and try to capture data that come on from GPS on port 5033 with SocketTest app. I got messages from GPS. I will send you messages on PM.

Do you have an idea what could be the problem for what I mentioned earlier?

I haven't received any messages from you.

Sorry Anton, I sent it on wrong mail. I sent it again