Commands

Hypemedia 2 years ago

What I try to achieve is to send a command back to the GPS device.

  1. For that I defined a simple command getver
    https://ibb.co/nkBD6TV

  2. I have connected that custom command to the device.
    https://ibb.co/JRtXsXs

  3. I send the command to the device.
    https://ibb.co/RSzdNxR

Expected outcome:
Returns code version, device IMEI, modem app version, RTC time, Init time, Uptime and BT MAC address.

Result:
There is no data returned.

This is the info in the traccar logs:

2024-03-31 01:41:30  INFO: [U7ffb2dbf] id: 864636063986067, command type: custom sent
2024-03-31 01:41:30  INFO: [U7ffb2dbf: teltonika > 18.158.164.113] 00000000000000100c0105000000086765747665720d0a0100004d36
2024-03-31 01:46:08  INFO: Event id: 864636063986067, time: 2024-03-31 01:46:08, type: deviceUnknown, notifications: 0

Please let me know if more info is needed.

Thanks.

Anton Tananaev 2 years ago

The command is sent correctly to the device, from hat I can tell.

Hypemedia 2 years ago

Ok so the issue is a maybe a misconfiguration of the device for the response. I will talk to teltonika guys on monday to check with them.

Thanks.

Cristian 2 years ago

Hypemedia, how do you manage to send a command from the device list? according to this image it looks like this
https://ibb.co/RSzdNxR

Hypemedia 2 years ago

Not sure I understand the question from that screen I send the command, that command was in advanced linked to the device.

Hypemedia 2 years ago

So found out the issue the response on the Teltonika GPS (configuration of the hardware device) was set to AVL, I changed that to TCP/IP and now all the commands are working.
Thank you for assistance.