Hello Anton, receive a big hug from Mexico City, wishing you a happy new year. Please sendme your data for sendyou a good tekila bootle from mexico
I need your help to have the fuel and fuel consumption chart report.
The equipment is brand COBAN model GPS303F.
I have tried two versions of traccar 3.15 and 3.17 without good results.
I have several days looking for the solution, I have already searched the forum and I have not found the solution, please help me I'm going crazy.
In the status panel correctly shows the fuel volume as "fuel1" as shown in the following image:
https://www.dropbox.com/s/662gizmvtw00yu6/panel%20de%20estado.PNG?dl=0
But in the reports panel it does not show any results of "fuel" or "fuel consumption" as shown in the following image:
https://www.dropbox.com/s/bo1h6i33ome9gby/Panel%20reportes.PNG?dl=0
I also can not get the fuel graphic form report:
https://www.dropbox.com/s/431ifgi99ii1x5g/graphic%20Fuel%20report.PNG?dl=0
And I can not get the fuel consumption graphic form report:
https://www.dropbox.com/s/yvas1u03sy0gds4/fuel%20comsumtion%20report.PNG?dl=0
The data are sent to port 5001 (GPS103 protocol)
This is a fraction of the log file:
2019-01-05 03:00:49 DEBUG: [FD8A0112: 5001 < 189.240.103.203] HEX: 696d65693a3836343839333033323434303238342c747261636b65722c3139303130343231303034372c2c462c3033303034372e30302c412c313931372e37323037302c4e2c30393933352e36393631342c572c2c2c2c302c302c3130302e3030252c2c3b
2019-01-05 03:00:49 INFO: [FD8A0112] id: 864893032440284, time: 2019-01-05 03:00:47, lat: 19.29535, lon: -99.59494, course: 0.0
Using the tool:
https://www.traccar.org/hex-decoder/
imei:864893032440284,tracker,190104210047,,F,030047.00,A,1917.72070,N,09935.69614,W,,,,0,0,100.00%,,;
Protocol that matches whit Gps103Protocol:
https://github.com/traccar/traccar/blob/master/test/org/traccar/protocol/Gps103ProtocolDecoderTest.java
Please, guide me to resolve the fuel and fuel consumption graphic report.
Thank you very much in advance for the help.
Hello Anton, receive a big hug from Mexico City, wishing you a happy new year. Please sendme your data for sendyou a good tekila bootle from mexico
I need your help to have the fuel and fuel consumption chart report.
The equipment is brand COBAN model GPS303F.
I have tried two versions of traccar 3.15 and 3.17 without good results.
I have several days looking for the solution, I have already searched the forum and I have not found the solution, please help me I'm going crazy.
In the status panel correctly shows the fuel volume as "fuel1" as shown in the following image:
https://www.dropbox.com/s/662gizmvtw00yu6/panel%20de%20estado.PNG?dl=0
But in the reports panel it does not show any results of "fuel" or "fuel consumption" as shown in the following image:
https://www.dropbox.com/s/bo1h6i33ome9gby/Panel%20reportes.PNG?dl=0
I also can not get the fuel graphic form report:
https://www.dropbox.com/s/431ifgi99ii1x5g/graphic%20Fuel%20report.PNG?dl=0
And I can not get the fuel consumption graphic form report:
https://www.dropbox.com/s/yvas1u03sy0gds4/fuel%20comsumtion%20report.PNG?dl=0
The data are sent to port 5001 (GPS103 protocol)
This is a fraction of the log file:
Using the tool:
https://www.traccar.org/hex-decoder/
Protocol that matches whit Gps103Protocol:
https://github.com/traccar/traccar/blob/master/test/org/traccar/protocol/Gps103ProtocolDecoderTest.java
Please, guide me to resolve the fuel and fuel consumption graphic report.
Thank you very much in advance for the help.