GPS Compatibility IDD-213L Sinocastel

pmunoz7 years ago

Hello!.

I have a GPS sinocastel model IDD-213L, configured to use port 5086 on our server.

The device has been tested with the manufacturer's server and receives OBD and GPS data without problems, but when we change the sending of data to our server we only receive the connection and disconnection information of the equipment. (We have other models that work without problems).

An example of the data you receive is as follows:

2017-07-28 10:17:13 INFO: [DBD0AA5B] connected
07/28/2017 10:17:14 DEBUG: [DBD0AA5B: 5086 <191.126.99.172] HEX: 40408200033231334c32303137303031313039000000000000100136477b5964477b590400000000000000dc410f000000000204000709207910008304011c07110e110dd41a160714a95a0f00001e058c4944442d3231334c2056312e312e3120323031372d30352d3038004944442d3231334c2056312e312e300000006da10d0a
2017-07-28 10:18:44 INFO: [DBD0AA5B] disconnected

But no coordinate or OBD data is observed.

Will it be a compatibility issue? If this is the problem, how can we make it compatible?

Thanks for your time.

Anton Tananaev7 years ago

Basically it's a new protocol version. We have added support for it a few days ago, so it should be available with the next release.

pmunoz7 years ago

Thanks, I'll be watching the new version

pmunoz6 years ago

Hi.

I have reviewed the new version and can not find support for the indicated model. Will the support have been added?

Thank you

Anton Tananaev6 years ago

What do you mean reviewed? Have you tried it? Where is the log?

Richard5 years ago

Hello.
Sorry for replying to this old thread, but the title makes sense :)

I've set up the traccar server as docker container and i am using the Sinocastel IDD-213L device. The data is coming, but i see some funny numbers, like fuel consumption of 730 l/h or sometimes 300l/h. I am definitely not flying an airplane :-) Also the odometer is showing wrong numbers.

And the status window inside the web interface shows me sometimes "result of the command: 262075211606117". Sometimes i see instead "status: 262656". Is there a documentation of the different status parameters?

My last question is, is the device fully integrated? I got the device since 1 week, if you need the protocol documentation, i can provide to you.

Best regards
Richard

Richard5 years ago

Never mind... i've opened a new thread: https://www.traccar.org/forums/topic/sinocastel-idd-213l-fully-integrated/