Ignition status and battery status not showing, gt06 protocol

2022-11-08 00:23:47  INFO: [Tb5ba7093: gt06 < 119.160.116.220] 78781f12160b07131601cf033b5c8b072f800c001474019a012a450077cb107389970d0a
2022-11-08 00:23:47  INFO: [Tb5ba7093: gt06 > 119.160.116.220] 78780512107376290d0a
2022-11-08 00:23:47  INFO: [Tb5ba7093] id: 862201128006139, time: 2022-11-08 00:22:01, lat: 30.12331, lon: 66.97416, course: 116.0

1. Do you have protocol documentation?
2. What makes you think your device is sending it? Your sample doesn't have it, as far as I can tell.

https://www.dropbox.com/s/d7am0kxfdzzt96d/2021-07-16%20-%20ATS100%20and%20ATS200%20protocol%20%281%29.pdf?dl=0

Please find protocol documentation
I am using 5023 port in traccar

What about the second question?

I think device is sending all information. but traccar web not showing the ignition alerts and icon.

OK, do you have a proof?

Yes I am using another software which alerts when ignition is on and off.

Another software might be working differently. As far as I know, GT06-based protocols don't reporting ignition value in every message, which will result in not having alerts in Traccar. The solution is to configure attribute copying. Have you done that?

how should i configure attribute copying?

Read documentation and search forum. This has been discussed many times before.

I am trying but didnot find any proper discussion, please share any relevant link, Thanks

https://www.traccar.org/configuration-file/

Attribute copying changes status very late. and in status command it shows the ignition information.

GPRS:link 1 off,;link 2 off;GSM signal level:22,good;GPS:positioning;ACC:OFF;AC:ON;Fuel supply:ON;ExtPower:12.2V;Analog:0.70V;2022-11-01 05:42:00

@Ali,

Meaby this is helpfull for you

https://www.traccar.org/forums/topic/ignition-problem-with-traccar-54/