Hello Anton, I would like to know if you have how to get the ignition status of the khd protocol?
I have equipment on another tracking platform and it reports ignition status, but the Traccar system does not show.
follows HEX command that the device sends:
292980002827d9c249180215144243809505408363379200450236fb0000397fff4a000000000000000900a20d
How do you see if the ignition is located?
if you have how to add to the protocol in tracing, let me know the amount you would charge to put this function.
Traccar doesn't support ignition for KHD protocol at the moment.
The KHD protocol has the ignition status function.
appears in the document on the site Traccar with name "KHDtrack Standard Protocol V2.pdf"
Inside the protocol says "Tracking by Interval (Acc_On) - 0x34"
That's a command from server to device, but looks like acc is reported as a part of status field. You can use computed attributes to decode it.
Hello Anton, I would like to know if you have how to get the ignition status of the khd protocol?
I have equipment on another tracking platform and it reports ignition status, but the Traccar system does not show.
follows HEX command that the device sends:
How do you see if the ignition is located?
if you have how to add to the protocol in tracing, let me know the amount you would charge to put this function.