Teltonika FMB120 Ignition status
Did you check the connection diagram?
I have checked the connection. My ignition wire connected to DIN1. When I check sms command getio I get correct value on DI1:1(ignition on) or DI1:0 (ignition off). But on the traccar server Ignition Value all the time YES.
Traccar uses separate parameter (IO239) for ignition, not DI1. Make sure you configured device correctly to report it. I would recommend checking with Teltonika.
Hi Anton,
You were correct, by default teltonika ignition allocation was power source, so I had to change it in teltonika configurator to DIN1. After change ignition value is correct. Thank you for the help.
Hello,
I have connected two teltonika FMB120 devices. Ignition status all the time YES even if it is not. How can I fix it? Because of that trip reports are incorrect and engine hours value incorrect too. Thank you for the help.