Which part is not decoded correctly? Do you have breakdown?
As shown below:
2024-02-10 09:07:29 INFO: [Te7637370] id: 868184060041525, time: 2024-02-10 09:07:28, lat: 59.19003, lon: 39.92788, course: 220.0
2024-02-10 09:07:29 DEBUG: Event handled
2024-02-10 09:07:29 INFO: [Te7637370: egts > 176.59.16.120] 0100000b0010005b0000a600ab000600000000020200030000000090e9
2024-02-10 09:07:46 DEBUG: Registered Cleaners: {0}
2024-02-10 09:07:47 DEBUG: Evict skipped, no excess threads QueuedThreadPool[qtp371209277]@1620343d{STARTED,8<=8<=200,i=6,r=-1,t=-3184130ms,q=0}[ReservedThreadExecutor@247cabf8{reserved=0/2,pending=0}]
2024-02-10 09:07:47 DEBUG: Evict skipped, no excess threads QueuedThreadPool[qtp371209277]@1620343d{STARTED,8<=8<=200,i=6,r=-1,t=-3184130ms,q=0}[ReservedThreadExecutor@247cabf8{reserved=0/2,pending=0}]
2024-02-10 09:07:47 DEBUG: Evict skipped, no excess threads QueuedThreadPool[qtp371209277]@1620343d{STARTED,8<=8<=200,i=6,r=-1,t=-3184130ms,q=0}[ReservedThreadExecutor@247cabf8{reserved=0/2,pending=0}]
2024-02-10 09:07:47 DEBUG: Evict skipped, no excess threads QueuedThreadPool[qtp371209277]@1620343d{STARTED,8<=8<=200,i=6,r=-1,t=-3184129ms,q=0}[ReservedThreadExecutor@247cabf8{reserved=0/2,pending=0}]
2024-02-10 09:07:47 DEBUG: Evict skipped, no excess threads QueuedThreadPool[qtp371209277]@1620343d{STARTED,8<=8<=200,i=6,r=-1,t=-3184130ms,q=0}[ReservedThreadExecutor@247cabf8{reserved=0/2,pending=0}]
2024-02-10 09:07:47 DEBUG: Evict skipped, no excess threads QueuedThreadPool[qtp371209277]@1620343d{STARTED,8<=8<=200,i=6,r=-1,t=-3184130ms,q=0}[ReservedThreadExecutor@247cabf8{reserved=0/2,pending=0}]
2024-02-10 09:07:50 INFO: [Te7637370: egts < 176.59.16.120] 0100020b004100ad0001342e000000973529940300000000b4d7891a0202101800b4d7891a3ede5ca8fe4bc9388b000028eb01000000a800001108001e50006e000a00001405000279002504c2cb
2024-02-10 09:07:50 DEBUG: Event received
2024-02-10 09:07:50 DEBUG: Message queued
for a device with id: 868184060041525, the coordinates are decrypted, this is the device that transmits data directly to the server.
Devices that were relayed from the server with the ip address: 193.232.47.85, such decoding does not occur.
Good day!
I installed Traccar v. 5.12 (windows version with MySQL) and set up data relay from another server using the EGTS protocol on it, as a result I see only the status of the device, without geolocation.What could be the problem?
When checking the server with the Navtelecom s-2433 device using FLEX, EGTS, EGTS protocols with authorization, everything works correctly and data is received.
Below I present a part of the log file where the device is received and its date and time, as well as its status, are decrypted: