Dataforward from GpsGateServer Client to Traccar

Hi guys I'm doing a dataforward from a GpsGateServer to Traccar. The device is a Teltonika FM1100 and I'm having this logs:

2017-10-05 15:05:59 DEBUG: [926F71A0: 5027 < 149.56.69.210] HEX: 000f333532303934303833373134313130
2017-10-05 15:05:59  WARN: [926F71A0] error - Not enough readable bytes - Need 14644, maximum is 9 - IndexOutOfBoundsException (... < TeltonikaProtocolDecoder:346 < *:322 < ExtendedObjectDecoder:58 < ...)
2017-10-05 15:06:01 DEBUG: [926F71A0: 5027 < 149.56.69.210] HEX: 000000000000003d08010000015eedee21c001d65041880b0430af004500a7100005180b07010102000300b300b400f001ef010309001c4234c8180005014800000bb8000100008d24

Any clue about how can I do it?

Do you see "connected" message in the log for it?

Hi Anton ... I do not I even change the port to GpsGate 5026 but with this was worse cause I doesn't get any data. Any recommendation?

If you don't, it means that you are forwarding TCP stream to UDP port, so it won't work.

GpsGate makes the dataforward through udp protocols, so how would you do the dataforward? through Teltonika port or GpsGate port?

If you want to use UDP then you should configure Teltonika to use UDP as well.

I believe I'm not understanding .. The Teltonika FM1100 is reporting to the GpsGate Server through TCP and the GpsGate makes the dataforward through UDP .. If I make the dataforward to other GpsGate Server everything if fine .. but if I do it to Traccar Server how would I receive it? like Teltonika? or like GpsGate? .. if its like Teltonika FM1100 I gets the error that I send before ... but if its like GpsGate I don't see anything in the logs

That's a question for GpsGate.

Do u have test it before? communication between GpsGate and Traccar?

I have tested GpsGate protocol. I haven't tested forwarding myself, but quite a few users reported that it works.

And when they do, you doesn't know how they register the device? if like the device or like a gpsgate signal?

I believe it's like device, but I'm not completely sure.

Hi Anton, Traccar can use Teltonika UDP connection?

Yes, it can.

The Teltonika already has enable the UDP protocol? I was reading this: https://www.traccar.org/forums/topic/how-can-i-enable-teltonika-udp-protocol/ and I have the doubt if I have to change the file or something