mv710g stops transmitting
I recommend comparing logs between your server and Micodus.
I don't have access to the logs.
You should still be able to mock the data and see what Micodus server sends back. Then compare that with Traccar.
I don't know how to do that. Could you give me some tips?
You can probably work with an AI assistant to do that. If you don't know, some tips are probably not going to be enough.
I'm using several 710g's and they don't have that behavior.
Check your data sim config/credit/status and perhaps your own server/server's firewall.
I've tried different SIM cards and providers, but the behavior is the same. It works perfectly only with the micodus server. What firmware version do you have? Mine is: MV710G(70ELASA)_JT_V1.0
Hello again.
JT_V5.1
JT_V3.0
Several firmware versions, none v1.0
Maybe that's your issue, they provide you an interface and the files for firmware upgrade.
I have an MV710G that works normally with Micodus servers. When I switch it to my server, it works normally for 20 minutes. After that, it stops transmitting any data.
The last few lines of the log look like this:
and after sending the text message “RESTART#” or manually turning the tracker off and on does it start sending the backlog of data along with the current data. What am I doing wrong?