New Tracker WanWay S20 Pro
Thanks Anton,
i swapped the test sim card and successfully connected the tracker to traccar! :-)
Protocol used is huabao at port 5015
Here are the sms commands used:
PARAM#
IMEI:68XXXXXXXXX;IMSI:26203XXXXXXXXXX;TIMER:10,300;DISTANCE:0;HBT:5;SOS:,,,,;TimeZone:E,0,0;APN:ctm-mobile,,;Server0:1,one.gpsog.com,9760,0;
STATUS#
External power:OFF,0.0V;GPRS:Link Up;GSM Signal Level:H;GPS:Successful positioning;SVS Used in fix:21(12);GPS Signal Level:40,40,39,38,35,35,34,32,31,31,28,27;Defense:OFF;
SERVER,1,demo.traccar.org,5015,0#
OK!
GMT,E,8,0#
OK, The terminal will restart after 30 seconds!
Without the GMT command, the gps fix time send to traccar differs 8 hours...
Hi Sebastian,
Does your S20 PRO continue to work with traccar and your own sim card?
Because I bought one as soon as it was launched and it doesn't save the server change parameter even though it responds with OK to the configuration messages. I found that not all commands are the same as the regular S20, for example I haven't found a factory reset command that works, while I managed to change the APN
Hey Marco,
yes, the tracker still works and hold the server parameter. But i still use the original wanway sim card!
Hi Sebastian, thank you very much for these hints.
I was able to set all necessary things, like server, apn, timer
I use a german t-mobile card with apn internet.telekom
Tried both ports 5023 and 5015 but there is no ping in my logs
Used the IMEI as device ID
Any ideas whats wrong?
@Marcin you have to set an "0" before the IMEI as device id... ;)
Thanks Sebastian.
I think if i where able to get ANY entry from the tracker in the logs, i would have seen the ID.
Last the SIM Card was defect. Think i changed while it was on. So ordered new one but still no knocking in the logs.
The tracker looks pretty good but i think ill have to return it.
The device Wan Way Tech S20 PRO dont utilize the IMEI number as the ID Number, use unique the last 11 digits the IMEI Number, for example to IMEI Number: 863068052854240 the number what device send to the server is: 68052854240.
I'm Wait help you for avance whith your test.
Regards.
Today TrackerOne bricked my S20 pro 5pcs via FOTA.
After a failed OTA (FOTA) update, several units are now stuck in bootloader mode. They display the following message:
"Welcome to EiGENCOM D-Fota Time"
"no par(0xffff) found!"
The devices are no longer able to boot the main firmware, do not respond to SMS commands, and cannot connect to the server. It appears that the firmware has been erased or corrupted during the OTA process.
At the moment, the devices remain in D-FOTA bootloader mode and are waiting for firmware upload via UART.
Hey,
there is a new 4G Tracker released by WanWay (TrackerOne). It is branded with S20 Pro, the SIM can be swapped, but my Test SIM Card doesnt work and all the sms commands send to the card was never processed (swapped the sim back to an mobile phone and all sms received there)...
I think the device is manufactured by Huizhou Great-Will Industrial Co., Ltd. and the device model seems to be GAT24...
Did someone already worked with the device and traccar?
